logo
Vraag een offerte aan |
Thuis ProductenEpoxy AB-lijm

Heat Resistant (-60 to +100°C) Epoxy AB Glue with Touch Dry in 30 Minutes and Full Cure in 24 Hours

Alle producten

Epoxy AB-lijm

(118)

Gewijzigde Acrylkleefstof

(31)

Niet meer Spijkerslijm

(17)

Kleefmiddel voor draadverbinding

(22)

pakkingsmaker

(36)

502 superlijm

(8)

Keramisch tegelverzegelingsmiddel

(7)

Hardware Elektronische lijm

(14)

Autolijm

(14)

Huishoudelijke reparatielijm

(12)

Decoratie Meubellijm

(7)
Ik ben online Chatten Nu

Heat Resistant (-60 to +100°C) Epoxy AB Glue with Touch Dry in 30 Minutes and Full Cure in 24 Hours

Heat Resistant (-60 to +100°C) Epoxy AB Glue with Touch Dry in 30 Minutes and Full Cure in 24 Hours
Heat Resistant (-60 to +100°C) Epoxy AB Glue with Touch Dry in 30 Minutes and Full Cure in 24 Hours Heat Resistant (-60 to +100°C) Epoxy AB Glue with Touch Dry in 30 Minutes and Full Cure in 24 Hours Heat Resistant (-60 to +100°C) Epoxy AB Glue with Touch Dry in 30 Minutes and Full Cure in 24 Hours Heat Resistant (-60 to +100°C) Epoxy AB Glue with Touch Dry in 30 Minutes and Full Cure in 24 Hours

Grote Afbeelding :  Heat Resistant (-60 to +100°C) Epoxy AB Glue with Touch Dry in 30 Minutes and Full Cure in 24 Hours

Productdetails:
Plaats van herkomst: Hunan, China
Merknaam: DEYI
Betalen & Verzenden Algemene voorwaarden:
Min. bestelaantal: 10000
Contact

Heat Resistant (-60 to +100°C) Epoxy AB Glue with Touch Dry in 30 Minutes and Full Cure in 24 Hours

beschrijving
Kleur: Duidelijk Viscositeit: > 100000 cps/25 ℃
Mengselverhouding: 1: 1 Werktijd: 20 minuten
Aanrakings droge tijd: 30 minuten Volledige genezingstijd: 24 uur
Legschersterkte: ≥ 16 MPA Hittebestendigheid: -60 tot +100 ℃
Houdbaarheid: 12 maanden Hoofdmateriaal: Ethyl-cyanoacrylate-ethyl
Zuurweerstand: Ja Alkali -weerstand: Ja
Olieweerstand: Ja Waterdicht: Ja
Niet-ontvlambaar: Ja
Markeren:

Heat Resistant Epoxy AB Glue

,

Touch Dry in 30 Minutes Epoxy Resin Adhesive

,

Full Cure in 24 Hours Two-Component Epoxy

30 Minutes Epoxy Resin/Epoxy Adhesive AB Glue Black and White
Heat Resistant (-60 to +100°C) Epoxy AB Glue with Touch Dry in 30 Minutes and Full Cure in 24 Hours 0
DEYI-730 30 minutes epoxy resin/epoxy adhesive AB glue black and white
30-MIN EPOXY ADHESIVE is resistant to acid, alkali, and oil. Non-flammable, non-shrinking and waterproof. Makes metallic grey finish. Can be filed, grinded and drilled.
Technical Parameters
Color Viscosity (CPS/25℃) Mixture Work Time (25℃/100g) Cure Time (25℃/100g) Lap Shear Strength (St-St) Heat Resistance (℃) Shelf Life (25℃)
A:black A:>100000 1:1 20 Minutes Touch Dry:30 Mins ≥16 Mpa -60 to +100 12 months
B:milky white B:>100000 Full Cure: 24 hrs
Product Description
Heat Resistant (-60 to +100°C) Epoxy AB Glue with Touch Dry in 30 Minutes and Full Cure in 24 Hours 1 Heat Resistant (-60 to +100°C) Epoxy AB Glue with Touch Dry in 30 Minutes and Full Cure in 24 Hours 2 Heat Resistant (-60 to +100°C) Epoxy AB Glue with Touch Dry in 30 Minutes and Full Cure in 24 Hours 3 Heat Resistant (-60 to +100°C) Epoxy AB Glue with Touch Dry in 30 Minutes and Full Cure in 24 Hours 4
Storage & Warnings
Storage:
  • Store the adhesive in shady, dry, well-ventilated, damp-proofing places.
  • Store the adhesive at room temperature.
  • Keep away from any source of ignition.
Warnings:
  • The adhesive is irritable to skin and eyes.
  • Keep out of reach of children.
  • In case of skin or eye contact, flush with water and seek medical treatment immediately if necessary.
Directions
  • Clear the contaminants like water, dusts, oil of the substrate surface to keep it clean, dry and smooth.
  • Remove the cap from the tube and puncture the tubes.
  • Mix part A and part B at the ratio of 1:1. Mix thoroughly until a uniform color is achieved. It must be used within 20 minutes.
  • Apply a thin coat to both surfaces. Mixture will become warm while it sets. No clamping. Slight pressure is needed while material sets.
  • If temperature is below 5℃, it will take a longer time to cure.
Cautions
Heat Resistant (-60 to +100°C) Epoxy AB Glue with Touch Dry in 30 Minutes and Full Cure in 24 Hours 5

label:

ab kleefmiddel,

ab lijm,

ab epoxylijm

Contactgegevens
Hunan Baxiongdi New Material Co., Ltd.

Contactpersoon: SU

Tel.: 008615200906996

Fax: 86-731-86677379

Direct Stuur uw aanvraag naar ons (0 / 3000)

Over

Epoxy AB-lijm

Supersterke epoxyhars Kleefstof voor de gezondheid van metaal lassen Geen giftige AB epoxy lijm

AB Epoxy Kleefmiddel helder en hittebestendig voor hoogtemperatuur roestvrij staal

Professionele epoxyharsysteem 30 min Houding doorzichtige lijm hars Epossidica

Gewijzigde Acrylkleefstof

5 minuten aanvankelijke harding van gemodificeerde acryllijm voor rode en groene oppervlakken

Jt40 Acryl Gemotiveerd AB Acryllijm En Groen Translucent Met Werktyd 5min

Transparante aangepaste acryl AB lijm 5 minuten lijm voor dagelijkse behoeften

LAAT BERICHT ACHTER

Privacybeleid | China Goed Kwaliteit Epoxy AB-lijm Leverancier. © 2024 - 2025 Hunan Baxiongdi New Material Co., Ltd.. All Rights Reserved.