logo
Vraag een offerte aan |
Thuis ProductenEpoxy AB-lijm

Electrical Potting Adhesive with Dielectric Strength >25kv/mm Tensile Strength >40Mpa and Bending Strength >80Mpa for Medium-high Voltage Insulation

Alle producten

Epoxy AB-lijm

(103)

Gewijzigde Acrylkleefstof

(31)

Niet meer Spijkerslijm

(17)

Kleefmiddel voor draadverbinding

(22)

pakkingsmaker

(36)

502 superlijm

(8)

Keramisch tegelverzegelingsmiddel

(7)

Hardware Elektronische lijm

(14)

Autolijm

(14)

Huishoudelijke reparatielijm

(12)

Decoratie Meubellijm

(7)
Ik ben online Chatten Nu

Electrical Potting Adhesive with Dielectric Strength >25kv/mm Tensile Strength >40Mpa and Bending Strength >80Mpa for Medium-high Voltage Insulation

Electrical Potting Adhesive with Dielectric Strength >25kv/mm Tensile Strength >40Mpa and Bending Strength >80Mpa for Medium-high Voltage Insulation
Electrical Potting Adhesive with Dielectric Strength >25kv/mm Tensile Strength >40Mpa and Bending Strength >80Mpa for Medium-high Voltage Insulation Electrical Potting Adhesive with Dielectric Strength >25kv/mm Tensile Strength >40Mpa and Bending Strength >80Mpa for Medium-high Voltage Insulation Electrical Potting Adhesive with Dielectric Strength >25kv/mm Tensile Strength >40Mpa and Bending Strength >80Mpa for Medium-high Voltage Insulation Electrical Potting Adhesive with Dielectric Strength >25kv/mm Tensile Strength >40Mpa and Bending Strength >80Mpa for Medium-high Voltage Insulation Electrical Potting Adhesive with Dielectric Strength >25kv/mm Tensile Strength >40Mpa and Bending Strength >80Mpa for Medium-high Voltage Insulation

Grote Afbeelding :  Electrical Potting Adhesive with Dielectric Strength >25kv/mm Tensile Strength >40Mpa and Bending Strength >80Mpa for Medium-high Voltage Insulation

Productdetails:
Plaats van herkomst: Hunan, China
Merknaam: DEYI
Modelnummer: DY-EP600-1
Betalen & Verzenden Algemene voorwaarden:
Min. bestelaantal: 3000
Contact

Electrical Potting Adhesive with Dielectric Strength >25kv/mm Tensile Strength >40Mpa and Bending Strength >80Mpa for Medium-high Voltage Insulation

beschrijving
Hoofdmateriaal: EPOXY Kleur: EEN: Zwart; B:Grijs Wit
Viscositeit a: 5000-15000 cps Viscositeit B: 1000-3000cps
Bedrijfstijd: 1h Mengverhouding: 10:9
Temperatuurbereik: -60°C tot 125°C Hardheid: 80~85A
Diëlektrische sterkte: > 25kv/mm Treksterkte: > 40 MPa
Buigsterkte: > 80 MPa Uithardende toestand: 85℃/3-5H+105℃/6-8H
Verwarm de temperatuur voor: 50-60℃ Afschuimingstijd: 5-10 minuten
Uithardingstijd: 85℃/3-5H+105℃/6-8H
Markeren:

Dielectric Strength >25kv/mm Electrical Potting Adhesive

,

Tensile Strength >40Mpa Epoxy Resin Potting Compound

,

Bending Strength >80Mpa Liquid Epoxy Resin

Electrical Potting Adhesive - Liquid Epoxy Resin for Medium-High Voltage Insulation
High-Temperature Resistant Epoxy Resin Potting Compound

This electrical potting adhesive provides superior protection for electronic components with excellent high temperature resistance and electrical insulation properties.

Electrical Potting Adhesive with Dielectric Strength >25kv/mm Tensile Strength >40Mpa and Bending Strength >80Mpa for Medium-high Voltage Insulation 0
Key Features
  • Eliminates adverse effects of UV light, ozone, moisture, and chemicals on circuits
  • Excellent high and low temperature resistance
  • Superior electrical insulation performance
  • High thermal conductivity with low expansion rate
  • Waterproof, oil resistant, dust proof, corrosion resistant
  • Excellent aging resistance and cold/hot impact resistance
Electrical Potting Adhesive with Dielectric Strength >25kv/mm Tensile Strength >40Mpa and Bending Strength >80Mpa for Medium-high Voltage Insulation 1 Electrical Potting Adhesive with Dielectric Strength >25kv/mm Tensile Strength >40Mpa and Bending Strength >80Mpa for Medium-high Voltage Insulation 2
Application Method
  1. Preheat components A and B at 50-60℃ for 2 hours before mixing
  2. Mix at mass ratio A:B = 100:90, stirring thoroughly
  3. Vacuum defoaming for 5-10 minutes after mixing
  4. Pour mixture into product promptly to maintain fluidity
  5. Cure at 85℃ for 3-5 hours followed by 105℃ for 6-8 hours
Packaging & Shipping
Electrical Potting Adhesive with Dielectric Strength >25kv/mm Tensile Strength >40Mpa and Bending Strength >80Mpa for Medium-high Voltage Insulation 3
Frequently Asked Questions
Q: Are you a factory or trading company?

A: We are a factory with 25 years of manufacturing experience.

Q: Can you provide samples?

A: Yes, we provide free samples with customers responsible for freight costs.

Q: What is your minimum order quantity?

A: Our MOQ is 3,000 units.

About Hunan Baxiongdi New Material Co., Ltd.

Established in 1999, we are a leading adhesive manufacturer in Changsha, China with certifications including SGS, ROSH, and ISO9001. Our product range includes RTV silicone, liquid nails, threadlockers, acrylic adhesives, and epoxy adhesives.

We welcome OEM partnerships and are committed to providing high-quality products and service to international clients.

label:

ab kleefmiddel,

ab lijm,

ab epoxylijm

Contactgegevens
Hunan Baxiongdi New Material Co., Ltd.

Contactpersoon: SU

Tel.: 008615200906996

Fax: 86-731-86677379

Direct Stuur uw aanvraag naar ons (0 / 3000)

Over

Epoxy AB-lijm

Supersterke epoxyhars Kleefstof voor de gezondheid van metaal lassen Geen giftige AB epoxy lijm

AB Epoxy Kleefmiddel helder en hittebestendig voor hoogtemperatuur roestvrij staal

Professionele epoxyharsysteem 30 min Houding doorzichtige lijm hars Epossidica

Gewijzigde Acrylkleefstof

5 minuten aanvankelijke harding van gemodificeerde acryllijm voor rode en groene oppervlakken

Jt40 Acryl Gemotiveerd AB Acryllijm En Groen Translucent Met Werktyd 5min

Transparante aangepaste acryl AB lijm 5 minuten lijm voor dagelijkse behoeften

LAAT BERICHT ACHTER

Privacybeleid | China Goed Kwaliteit Epoxy AB-lijm Leverancier. © 2024 - 2025 Hunan Baxiongdi New Material Co., Ltd.. All Rights Reserved.